Fix Resolution When Using Your HDTV as a Monitor.

Looking for:

How to adjust screen size using tv as monitor.Using a TV as a monitor, the edges of the screen are cut off. How can I make it fit properly?

Click here to ENTER


Locate and Adjust Typical Controls. If this does not work, or if you cannot find the controls, see the next section. After changing the setting, you may need to adjust the settings made in the previous section.

On some displays there is an input mode setting or label that defines the display connection, regardless of the type of cable connected to the display. After changing the setting, you may need to adjust the settings made in the previous sections. Read Zachary’s Full Bio. We will never spam you, unsubscribe at any time. Table of Contents. Subscribe on YouTube! Did you enjoy this tip?

We cover Windows, Mac, software and apps, and have a bunch of troubleshooting tips and how-to videos. Open Display Settings. Find Current Resolution. Change Resolution Settings. Time Remaining To Apply Setting. Keep Resolution Settings. Open Intel Graphics Properties. Intel Graphics Control Panel. Not exactly. The short answer: Yes. Amazon sells a six ft. Bottom line?

Most stick to standard p, p, or 4K resolutions however. In the window that pops up, click List All Modes. There are a few different factors to keep in mind if you want to use an HDTV as a computer monitor. Pixel density, or the number of pixels packed into one square inch of screen measured in pixels per inch or ppi , is the most important factor to consider.


How to adjust screen size using tv as monitor. How to adjust the HDMI screen size on TV from Windows 10


Find your computer’s video output port. Transmits both audio and video. VGA – A blue trapezoid with holes in it. Also found on the backs of iMac computers. Find your TV’s video input options.

You’ll usually find the video input section on the side or back of the TV. Determine whether or not you need an adapter. If both your computer and your TV have the same port type e. Buy any adapters and cables that you need. You can usually pick up cables and adapters in tech stores such as Best Buy, as well as online in places like Amazon and eBay.

Plug one end of the cable into your computer. The cable should plug into your computer’s video output port. Plug the other end of the cable into your TV. If you bought an adapter to bridge the gap between two separate cables, you’ll instead plug the computer’s cable into one end of the adapter, attach the other end of the adapter to the other cable, and plug the other cable into the TV.

Connect an audio cable if necessary. Use a standard 3. The Audio Out port on your computer is usually green, and may have a symbol indicating that it is sending signal out. Turn on the TV. Switch your TV to the correct input. Use your TV’s remote to turn it on and switch to the input that you connected your computer to. The input in question will usually have a label, such as “HDMI 1” or “1”. You can also use the Input or Video button on your TV to cycle through the available inputs.

Wait for your computer’s screen to appear. Once you see your computer’s screen appear on the TV, you can proceed with changing your display settings to set up your TV’s screen as you like. Part 2. Click System. It’s a computer-shaped icon in the Settings window. Click the Display tab. This option is on the left side of the Display window. Scroll down to the “Multiple displays” section. It’s near the bottom of the page. Click the “Multiple displays” drop-down box. Doing so prompts a drop-down menu.

Click Extend these displays. It’s an option in the drop-down box. This will ensure that your TV’s screen acts as a continuation of your PC’s screen rather than just duplicating it. Use your extended TV display.

Moving your mouse all the way to the right edge of your computer will move the mouse onto your TV’s screen, where you can proceed to use the computer like usual. Any content on your computer’s screen will remain as it was before extending the display. Think of the TV as a screen immediately to the right of your computer’s screen. Part 3. Click System Preferences…. It’s near the top of the drop-down menu.

Doing so opens the System Preferences window. Click Displays. This computer monitor-shaped icon is in the middle of the System Preferences window. Click the Displays tab. It’s in the upper-left corner of the window. Change the TV’s resolution.

Check the “Scaled” box, then click a resolution. You can’t use a resolution that’s higher than your TV’s built-in resolution e. Change the screen scaling. Click and drag the “Underscan” slider that’s at the bottom of the page left to show more of your Mac’s screen on the TV or right to zoom in the screen. This will help you fit your Mac’s screen to your TV if the image on the TV is too large or too small.

Click the Arrangement tab. You’ll find this option at the top of window. Uncheck the “Mirror displays” box. This will prevent the TV from merely duplicating what you see on your Mac. Skip this step if the box is unchecked. Move the TV’s screen icon if necessary. The TV’s screen icon, which is usually the larger rectangle at the top of the window, should be to the right of your Mac’s screen icon. You can click and drag the TV’s icon to the right if necessary.

The screen icon with the white bar at the top of it is your Mac’s screen. VGA cables do not transfer audio. For the best quality image and easy audio transfer, use an HDMI cable.

If you have to use VGA, you’ll need a separate audio cable. Not Helpful 2 Helpful Depending on the type of TV you have, you can usually insert a flash drive or external hard drive and use it to view pictures and movies. However, if you want to use it as a second monitor for the a computer, you will have to connect it to your computer with a VGA or HDMI cable and use the controls on your computer. Change your computer display settings to identify the TV as a second monitor and either duplicate or extend the displays.

Not Helpful 4 Helpful I want to give a presentation using my laptop and the TV as my monitor. The TV is new and has not been connected to watch television. I have connected the laptop to the TV via the proper cable.

Once you’ve connected your TV and the screen is showing the extension of your desktop, start the DVD in your laptop’s media player, then drag the window onto the TV screen. When you set the video to full-screen, it will fill the TV display.

You can also mirror or duplicate your display so that the TV displays exactly what the laptop screen displays. Not Helpful 4 Helpful 8. I have a new smart TV. I want to know if I can buy a tower and keyboard and turn it into a computer that I can use for school.

Is there an adjustment I can make to get it to fit? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to DominicP’s post on July 9, Thanks, I couldn’t find any option in the menu that said anything about “Overscan”, but I found something called “HD Size”, and by adjusting that, I was able to make it fit.


How to adjust screen size using tv as monitor.Fix Resolution When Using Your HDTV as a Monitor

Give Driver Support a Try Today.


Leave a Reply

Your email address will not be published. Required fields are marked *